Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 65 mm Width : 28 mm The material of Wheel: High-strength plastic The material of Tyre: Rubber Color: Yellow add black

Specifications: Name: TT motor Color: Any Rated Voltage: 5.0V DC Working Voltage: 3.0V – 6.0V DC Current: (3V-150mA , 6V-200mA Speed: (3V-90rpm±10% , 6V-200rpm±10% Torque: max. 0.8kg/cm Reduction ratios: 1:48 Brush-type: Brush Body Size: 70mm x 37mm x 23mm Shaft Size: 8mm x 2mm diameter Weight: 17.5 grams Features : Cost-effectiveness of the injection-molding process. Elimination of machining operations. Low […]

Waterproof Ultrasonic Distance Sensor Waterproof Ultrasonic Distance Sensor gives distance value using ultrasonic waves . JSN-SR04T Ultrasonic Sensor can be read using any microcontroller board like ARDUINO UNO , ARDUINO DUE , ARDUINO PRO MINI , ARDUINO NANO AND OTHER DEVELOPEMNT PLATFORMS. Electrical parameters: JSN-SR04TOperating voltage: DC 5VQuiescent current: 5mATotal current work: 30mAAcoustic emission frequency: […]

Working Voltage: DC 3-5V Working Current: <20mA> Sensor Type: Simulation Detection Area: 40 mm x 16 mm Manufacturing Process: FR4 double spray tin Fixed Hole Size: 3.2 mm Humanized Design: Half moon sag nonskid treatment Working Temperature: 10oC to 30oC Work Humidity: 10% to 90% without condensation Size: 65 mm x 20 mm x 8 […]

Vibration sensor SW-420 The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 mA The working voltage of 3.3V to 5V Output form: digital switch output (0 and 1) Has a fixed bolt hole, convenient installation Using a wide voltage LM393 comparator Small board PCB size: 3.2cm x 1.4cm Good […]

The composition of the turbidity sensor module is shown below. The module is connected to the turbidity sensor through the 3Pin XH-2.54 connector. Adjust the knob of 10K blue potentiometer to adjust the trigger threshold of digital output The module pin definitions are as follows: VCC: Positive supply voltage, 5V cannot be used 3.3V AO: […]

Operating voltage 2.0V~5.5V Operating current @VDD=3V, no load, SLRFTB=1 The response time max about 60mS at fast mode, 220mS at low power mode @VDD=3V Sensitivity can adjust by the capacitance (0~50pF) outside Have two kinds of sampling length by pad option (SLRFTB pin) Stable touching detection of a human body for replacing traditional direct switch […]

Specifications and Features of TTP223 1-Channel Capacitive Touch Sensor Module Red Color:-   Supports momentary or latching/toggle modes. Supports Active High or Active Low output signal modes. Dimensions : 15mm x 11mm. Input Voltage : 2 Volt – 5.5 Volts DC. The response time max ~ 60mS in fast mode, ~220mS at low power mode VDD=3V. […]

Technical Specifications: Operating Voltage: 2.5V to 5V Supply Current: Typically around 0.1 mA Peak Sensitivity Wavelength: Approximately 570 nm (green light) Temperature Range: -40°C to +85°C Output Type: Analog voltage Sensitivity: Designed to be sensitive to light levels from 10 lux to 1000 lux, approximately.

Voltage: 3.3V-5 VDC Outputs: one analogue + one digital output Fixation: 1 x mounting screw hole (3 mm) Indicator LEDs: 1 power indicator + 1 comparator output indicator Frequency response: 50 Hz – 20 KHz Impedance: 2.2 kΩ Sensitivity: 48-66 dB Operating temperature: -40 °C to +85 °C Dimensions:  44 x 15 x 10 mm