PIR Motion Sensor Detector Module HC-SR501 is a passive infrared sensor that is used to detect motion. It works by sensing changes in the infrared radiation emitted by objects in its field of view, such as the body heat of a moving person. When motion is detected, the HC-SR501 outputs a digital signal to indicate […]

Description Small R280 Brushed DC Motor No Load RPM: 8000rpm (±10%) Size: 30.5 x 23.8 mm Weight: 42g Shaft Diameter: 2mm Shaft Length: 45mm Shaft Type: Round Rated Voltage: 6V Nominal Voltage: 3-6V No Load RPM: 8000rpm（±10%） No Load Current: 70ma Suitable for hobbies, models, science and other projects

Product details of 385 motor Micro Motor 385 DC  6V 12V For Toy Car Boat Electric Motor Bicycle Drill Vacuum Cleaner Household Hair Dryer Electric Tools Product Name : DC Motor Main Color : Silver Tone Material : Metal Type: 385 Voltage: DC 3v 6v 12v Stall Current: 1.3A No load speed: 16000 RPM Shaft […]

Description This is the DC motor, which can be used in any DIY project or in the science fair project. With an operating voltage range of 3V-9V this motors can be operated using two AA batteries or with a 5V USB power supply. Applications: Science Fair DIY Projects. Mini USB fans Small DIY appliances   […]

This Module makes use of the MQ-135 air quality detector and hazardous gas detector chip. Other circuit components such as the LM393 analog comparator chip on this module makes it easy to integrate this module into a project that can detect hazardous gases. The Module requires a 5V power supply and provides a digital Logic […]

The Analog Gas Sensor(MQ2) module utilizes an MQ-2 as the sensitive component and has a protection resistor and an adjustable resistor onboard. The MQ-2 gas sensor is sensitive to LPG, i-butane, propane, methane, alcohol, Hydrogen and smoke. It could be used in gas leakage detecting equipment in family and industry. It takes a short time […]

MQ-6 Liquefied Petroleum Isobutane Propane Gas sensor module is a great way to add basic gas sensing to your project at a reasonable price. TheMQ-5 Methane LPG Liquid Propane Gas Sensor Module particulate sensor uses a Buzzer to sense any detected material that is even present in the air! This is a simple-to-use MQ-6 Liquefied Petroleum Isobutane Propane […]

Features: Sensitive for LPG, natural gas, coal gas Output voltage boosts along with the concentration of the measured gases increases Fast response and recovery Adjustable sensitivity Signal output indicator Specifications: Power: 2.5V ~ 5.0V Dimension: 40.0mm * 21.0mm Mounting holes size: 2.0mm   Applications: Gas leakage detector   Wiring: In the case of working with […]

Description: – Light weight, high torque and low rpm. – This is a DC mini metal gear motor, good for diy engine, electric lock, robot model. – With excellent stall characteristics, can climb hills easily. – You can also easily mount a wheel on the motor’s output shaft. – Solidly construction and ready to install […]

The Raindrop Detection Sensor module is an easy-to-use and low cost drop recognition sensor. The sensor works through a series of exposed parallel traces on board which produces electrical variations when drops or water volume changes. By using microcontrollers or ADC ICs (Arduino and PIC) it’s fairly easy to convert the analog output from the […]

Product details of RXB6 433 MHz RF Transmitter & Receiver Module Range in open space: Up To50 Meters RX IF Frequency: 1MHz Very Stable Operating Frequency Low Current Consumption (Typ 11mA) Wide Operating Voltage (1.5- 3.3v-5v) Package Includes: 1 x 433Mhz RSI Wireless Transmitter Receiver Module.

This 5V servo motor allows precise control of angular position, extremely useful in robotics.   Specifications: Weight: 9g Dimension: 23×12.2x29mm Stall Torque: 22.2 oz/in (1.6 kg/cm) Operating Speed (4.8V no load): 0.12sec/60 degrees Operating Voltage: 4.2-6V Temperature Range: 0℃_ 55℃ Dead Band Width: 10us

This Servo Tester device can be used as a signal generator for electric speed controller (ESC). You can test your motor system without using transmitter and receiver. This little blue Servo Tester Module is a great tool that can connect with up to three Servo Motors simultaneously, to check the health and capabilities of them […]

Quad-band 850/900/1800/1900MHz GPRS multi-slot class12 connectivity: max. 85.6kbps(download/upload) GPRS mobile station class B Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands) Supports Real Time Clock Supply voltage range 3.4V ~ 4.4V Supports A-GPS Supports 3.0V to 5.0V logic level Low power consumption, 1mA in sleep mode Micro SIM card Compact […]

 Compatible with Raspberry Pi and Arduino Two power supply interface: VCC5, 5V DC above 1A. Computer 5V power supply can be early computer USB. DC long data circuit over larger recommended 5V1A. VCC4, 3.5-4.5V power supply, ibid., suitable for a lithium battery. Control pin all leads. A TTL level, compatible with 3.3V and 5V. The two antenna interface, […]

Supported Platforms: * Arduino * Raspberry Pi * ESP-8266 Features: Moisture Sensor Comparator Board (based on LM393) Easy to Use Detect soil moisture being capacitance sensor Analog and Digital output Operating voltage: 3.3V~5V Included Jumper Wires LED Indicators Digital High/Low Output Nickel Plated Anti-Rust Spade Wide Sensor Area M2.5 Mounting Holes Spade Dimensions: 65mm x […]

Voltage: 3.3V-5 VDC Outputs: one analogue + one digital output Fixation: 1 x mounting screw hole (3 mm) Indicator LEDs: 1 power indicator + 1 comparator output indicator Frequency response: 50 Hz – 20 KHz Impedance: 2.2 kΩ Sensitivity: 48-66 dB Operating temperature: -40 °C to +85 °C Dimensions:  44 x 15 x 10 mm

Technical Specifications: Operating Voltage: 2.5V to 5V Supply Current: Typically around 0.1 mA Peak Sensitivity Wavelength: Approximately 570 nm (green light) Temperature Range: -40°C to +85°C Output Type: Analog voltage Sensitivity: Designed to be sensitive to light levels from 10 lux to 1000 lux, approximately.

Specifications and Features of TTP223 1-Channel Capacitive Touch Sensor Module Red Color:-   Supports momentary or latching/toggle modes. Supports Active High or Active Low output signal modes. Dimensions : 15mm x 11mm. Input Voltage : 2 Volt – 5.5 Volts DC. The response time max ~ 60mS in fast mode, ~220mS at low power mode VDD=3V. […]

Operating voltage 2.0V~5.5V Operating current @VDD=3V, no load, SLRFTB=1 The response time max about 60mS at fast mode, 220mS at low power mode @VDD=3V Sensitivity can adjust by the capacitance (0~50pF) outside Have two kinds of sampling length by pad option (SLRFTB pin) Stable touching detection of a human body for replacing traditional direct switch […]